Resistance to metal contamination by historically-stressed populations of Ceriodaphnia pulchella: environmental influence versus genetic determination

Field populations of daphnids historically-stressed by metal contamination may show increased resistance to those contaminants. This study was undertaken aiming to confirm/infirm three main hypotheses: (1) field populations living in historically-impacted environments are more tolerant to metal stress than populations from reference sites; (2) resistance differences are genetically-determined, i.e., differences persist after controlling for environmental and maternal effects, by acclimating cloned lineages to similar conditions; and (3) resistance to stress in field populations living in historically-impacted environments is due to the disappearance of sensitive individuals rather than the appearance of highly resistant ones, i.e., the shift in the central tendency of resistance is linked to a decrease in the range of population resistance and not to an increased upper limit of the population resistance. Three populations of the cladoceran Ceriodaphnia pulchella Sars in Southern Portugal were sampled; one of which has been historically-stressed by acid mine drainage (AMD) from an abandoned cupric-pyrite mine and two from reference sites within the same watershed. To assess if resistance differences were genetically-determined, the three populations were acclimated for at least five generations under the same controlled conditions. Assays with AMD contaminated water samples were performed with both non-acclimated and acclimated individuals from all studied populations. Reproduction results in sub-lethal assays revealed significant differences between the reference and stressed populations. Significant differences in resistance to lethal levels of toxicity were observed for both non-acclimated and acclimated populations, individuals from population I being more resistant than those from reference populations. The existence of genetically-determined sensitivity differences was attested by the presence of significant differences in resistance to lethal levels of toxicity in acclimated individuals from reference and stressed populations. Results from cumulative mortality assays revealed that sensitive individuals were most probably present in the original population, but no conclusion could be draw about the presence of extreme resistant individuals in the historically-stressed population. Finally, it was shown that responses among populations converged from high to low levels of contamination.     

Effects of herbicide and insecticide interaction on soil entomofauna under maize crop

The aim of this study was to evaluate the impact of the herbicide mixture nicosulfuron + atrazine, with or without the insecticide chlorpyrifos, onto soil entomofauna under maize crop. The treatments, applied 25 days after maize emergence, were represented by a weeded control without insecticide and herbicide, a weeded control with chlorpyrifos, and mixtures of nicosulfuron + atrazine, with or without chlorpyrifos. Arthropods populations, on the soil surface, as well as inside the soil under maize, were principally represented by mites (Arachnida: Acari), decomposer collembolans (Hexapoda:Parainsecta:Collembola) and predator ants (Hymenoptera:Formicidae). The nicosulfuron + atrazine mixture with chlorpyrifos and the isolated chlorpyrifos reduced the population dynamics of all insect groups on the soil surface compared to the weeded control. In the soil, mite and ant populations were reduced after application of the herbicide mixture with chlorpyrifos and of the isolated chlorpyrifos.     

Comparative study on the susceptibility of freshwater species to copper-based pesticides

Copper compounds have been intentionally introduced into water bodies as aquatic plant herbicides, algicides and molluscicides. Copper-based fertilizers and fungicides have been widely used in agriculture as well. Despite the fact that copper is an essential element for all biota, elevated concentrations of this metal have been shown to affect a variety of aquatic organisms. Nonetheless, comparative studies on the susceptibility of different freshwater species to copper compounds have seldom been performed. This study was conducted to compare toxicity of copper-based pesticides (copper oxychloride, cuprous oxide and copper sulfate) to different freshwater target (Raphidocelis subcapitata, a planktonic alga and Biomphalaria glabrata, a snail) and non-target (Daphnia similis, a planktonic crustacean and Danio rerio, a fish) organisms. Test water parameters were as follows: pH = 7.4 +/- 0.1; hardness 44 +/- 1 mg/l as CaCO3; DO 8-9 mg/l at the beginning and > 4 mg/l at the end; temperature, fish and snails 25 +/- 1 degrees C, Daphnia 20 +/- 2 degrees C, algae 24 +/- 1 degrees C. D. similis (immobilization), 48-h EC50s (95% CLs) ranging from 0.013 (0.011-0.016) to 0.043 (0.033-0.057) mg Cu/l, and R. subcapitata (growth inhibition), 96-h IC50s from 0.071 (0.045-0.099) to 0.137 (0.090-0.174) mg Cu/l, were the most susceptible species. B. glabrata (lethality), 48-h LC50s from 0.179 (0.102-0.270) to 0.854 (0.553-1.457) mg Cu/l, and D. rerio (lethality), 48-h LC50s 0.063 (0.045-0.089), 0.192 (0.133-0.272) and 0.714 (0.494-1.016) mg Cu/l, were less susceptible than Daphnia to copper-based pesticides. Findings from the present study therefore suggest that increased levels of copper in water bodies is likely to adversely affect a variety of aquatic species.     

Municipal solid waste shear strength parameters defined through laboratorial and in situ tests

This paper presents the parameters of municipal solid waste shear strength determined in the laboratory (triaxial tests) and by in situ tests: standard penetration tests (SPT) and cone penetration tests (CPT). The results analyzed here are part of a study carried out on the Santo Tirso landfill (north of Portugal) between 2001 and 2007. The influence of the strain levels, waste composition, and waste age on the shear strength parameters is presented, as well as an attempt to establish some correlations between the SPT and CPT tests and to estimate municipal solid waste (MSW) friction angles from the SPT tests. The results indicate that the aging of the waste, which is characterized by a decrease in fibrous and organic materials and an increase in inert materials and fine fraction, leads to an increase in frictional resistance and to a decrease in cohesion. The results of the SPT and CPT tests indicate higher penetration resistance in older and deeper waste. Estimating the frictional resistance from the SPT test seems to obey an empirical relationship expressed by a power function, which depends on the strain level.

Implications: Comparison of shear strength parameters of municipal solid waste (MSW) determined through laboratory (triaxial tests) and in situ tests (SPT and CPT) showed that the greater amount of fibrous and granular elements leads to an increase in “cohesion” and in friction angle values, respectively. Waste aging results in an increase in frictional resistance and in a decrease in “cohesive” resistance. This is consistent with the composition changes with aging: increase of the relative quantity of inert materials and fine fraction, and decrease in particle size, in organic matter content, and in fabrics and plastics.     

Stabilization/solidification of fly ashes and concrete production from bottom and circulating ashes produced in a power plant working under mono and co-combustion conditions

Two combustion tests were performed in a fluidized bed combustor of a thermo-electric power plant: (1) combustion of coal; (2) co-combustion of coal (68.7% w/w), sewage sludge (9.2% w/w) and meat and bone meal (MBM) (22.1% w/w). Three samples of ashes (bottom, circulating and fly ashes) were collected in each combustion test. The ashes were submitted to the following assays: (a) evaluation of the leaching behaviour; (b) stabilization/solidification of fly ashes and evaluation of the leaching behaviour of the stabilized/solidified (s/s) materials; (c) production of concrete from bottom and circulating ashes. The eluates of all materials were submitted to chemical and ecotoxicological characterizations. The crude ashes have shown similar chemical and ecotoxicological properties. The s/s materials have presented compressive strengths between 25 and 40 MPa, low emission levels of metals through leaching and were classified as non-hazardous materials. The formulations of concrete have presented compressive strengths between 12 and 24 MPa. According to the Dutch Building Materials Decree, some concrete formulations can be used in both scenarios of limited moistening and without insulation, and with permanent moistening and with insulation.     

Rapid and Low-Cost Method for Evaluation of Nutrient Release from Controlled-Release Fertilizers Using Electrical Conductivity

Methods to determine nutrient release rates of coated fertilizers usually rely on chemical analyses, which often are time-consuming and/or expensive. Our goal was to develop an innovative and rapid low-cost method to evaluate nutrient release from polymer coated MAP or urea using conductometry. The release in water is determined by measuring the electric conductivity (EC) over time, with intervals dependent on release rates. In the case of soluble salt fertilizers, EC can be immediately determined and converted to a concentration using a calibration curve. In the case of urea, an additional step is needed to convert the neutral urea into ammonium. The release rates in water were assessed for a range of commercial and laboratory-coated fertilizers. A validation test demonstrated strong agreement with the release determined using analytical techniques. The EC method hence offers an easy way to quickly evaluate the time course of release of nutrients from controlled-release fertilizers.     

Leachability of automotive shredder residues burned in a fluidized bed system

This paper presents the results of the study of a combustible fraction of automotive shredder residues (CASRs) and the corresponding ashes generated by combustion on a fluidized bed pilot with the aim to understand the influence of thermal treatment regarding properties for final disposal, such as landfilling. The chemical composition was evaluated and the leachability behaviour of ashes and CASR was investigated using the three more commonly used tests: the European Standard EN 12457, the US TCLP-EPA 1311 and the Dutch availability test EA NEN 7371. Different results were obtained depending on the specific conditions of the methods employed. It was found that both the CASR and the ashes contained large amounts of toxic metals and other undesirable elements, such as Cl and S. For the CASR, in addition to the leachability of organic matter above the limit set for hazardous materials, the release of heavy metals, either under alkaline and acidic conditions was significant, revealing the serious risks associated to the landfilling practices still being undertaken worldwide. Release of organic matter from ashes was insignificant, but solubility of sulphates increased and chlorides exceed the hazardous limits in the case of fly ashes. Toxic metals were found to leach from the ashes only under acidic conditions, except Pb and Cu which also leached from finer ashes at alkaline pH. Cr also leached from ashes at alkaline pH values. Both the Dutch availability and TCLP revealed much higher leaching intensities than the European Standard due to the acidity of leachants. However, it was found that ashes may be more resistant to acidification because they exhibit much higher acid neutralization capacity (ANC) than the untreated CASR. The study undertaken shows that thermal valorisation of the combustible fraction of ASR may avoid the risks associated with their landfilling; however, care has to be taken with the ashes because they also behave as hazardous residues. Although, the mass reduction provided by thermal treatment may make landfilling less expensive, a more profitable reutilization of the ashes should be developed.     

Experimental study on the survival of the water hyacinth (Eichhornia crassipes (Mart.) Solms—Pontederiaceae) under different oil doses and times of exposure

In the last decades, petroleum activities have increased in the Brazilian Amazon where there is oil exploration on the Urucu River, a tributary of the Amazon River, about 600 km from the city of Manaus. Particularly, transportation via the Amazon River to reach the oil refinery in Manaus may compromise the integrity of the large floodplains that flank hundreds of kilometers of this major river. In the Amazon floodplains, plant growth and nutrient cycling are related to the flood pulse. When oil spills occur, floating oil on the water surface is dispersed through wind and wave action in the littoral region, thus affecting the vegetation of terrestrial and aquatic environments. If pollutants enter the system, they are absorbed by plants and distributed in the food chain via plant consumption, mortality, and decomposition. The effect of oil on the growth and survival of vegetation in these environments is virtually unknown. The water hyacinth [Eichhornia crassipes (Mart.) Solms] has a pantropical distribution but is native to the Amazon, often growing in high-density populations in the floodplains where it plays an important role as shelter and food source for aquatic and terrestrial biota. The species is well known for its high capacity to absorb and tolerate high levels of heavy metal ions. To study the survival and response of water hyacinth under six different oil doses, ranging from 0 to 150 ml l^?1, and five exposure times (1, 5, 10, 15, and 20 days), young individuals distributed in a completely randomized design experiment composed of vessels with a single individual each were followed over a 50-day period (30-day acclimatization, 20 days under oil treatments). Growth parameters, biomass, visual changes in the plants, and pH were recorded at 1, 5, 10, 15, and 20 days. Increasing the time of oil exposure caused a decrease in biomass, ratio of live/dead biomass and length of leaves, and an increase in the number of dead leaves. Dose of oil and time of exposure are the most important factors controlling the effects of petroleum hydrocarbons on E. crassipes. Although the species is able to survive exposure to a moderate dose of oil, below 75 ml l^?1 for only 5 days, severe alterations in plant growth and high mortality were observed. Therefore, we conclude that Urucu oil heavily affects E. crassipes despite its known resistance to many pollutants.